Home

Boiler and underfloor heating controls

Wiring the boiler, pumps and underfloor heating zones, with a thermostat for every room.

The job

Underfloor heating has a manifold of loops, each opened by a small actuator and called for by a room thermostat. We wire the wiring centre, the pump and the boiler together so every zone heats on its own, and leave the plant cupboard labelled and easy to service.

How we do it

  1. Wire the boiler, pumps and valves
  2. Fit the underfloor heating wiring centre by the manifold
  3. Connect an actuator on every loop and a thermostat in every room
  4. Label each zone in the plant cupboard
  5. Test the heating zone by zone with the plumber

Planning something similar?

Tell us about the job and add a photo or two. We will come back with next steps and a clear price.